Now days, wood engraving and cutting is commonly achieved by CO2 laser cutting and engraving machine. So, today we will talk about CO2 laser cutting and engraving machine and wooden material.
Log (raw wood)
Wood is the most commonly used material in laser process and is easy to be engraved and cut.Light-colored woods such as birch, cherry or maple are well laser-vaporized and thus it is suitable to be carved.Each kind of wood has its own characteristic. Some are dense, like hardwood, then it needs to use big laser power during engraving or cutting.We recommend that you should study the characteristics of unfamiliar wood before engraving it.
Plywood
Sometimes customers may ask you to engrave on the plywood. Actually, this is not too much different from engraving on the wood. it is just a little bit to be paied attention to: the engraving depth should not be too deep.
Wood cutting
The depth of laser engraving machine cutting wood is generally not deep, within 5mm. This is because the laser power is small, if using slow cutting will cause wood combustion.In practicing, you can try to use a large size lens and repeat cutting.
Whatsapp&Skype: 008615314123561
Youtube:rita15314123@gmail.com
Facebook:008615314123561
INS:008615314123561
Wbesite: www.bogongcnc.com
Jinan Bogong Machinery Co ,Ltd
