Fiber laser marking machine Can Make black on Metal ?
Nowadays, many fiber laser marking machines need to be black when marking metal. How can we use the fiber laser marking machine to make black on the metal? How should the parameters be set?
First of all, not all materials can be black. Aluminum can't be played very black, but it can be printed with a black and gray small print with high contrast. It is not bad to be able to clear the copper. In general, the higher the carbon content, the easier it is to make black. This is very simple, everyone knows. Then the alumina is blacked out. If the alumina is blacked out, it is not just a matter of adjusting the parameters.
If you want to black alumina, you need a laser with MOPA technology. This special machine can be used to achieve this.
The parameter setting is based on the black laser stainless steel 20W fiber laser marking machine for example:
First of all, when filling, the line spacing is 0.01-0.02MM, and the margin can be set to a large point. The pattern can be displayed correctly and the finer the better. Then the marking speed is 100-200MM/S, the smaller the blacker, but The slower you play;
Select the overall calculation of the graphics when marking, if you are not at ease, you can combine or group and then fill;
The marking angle is the shortest for each marking line, and the blackness will be consistent. The marking angle is shorter than the filling line. Under normal circumstances, 45 degrees can be selected.
The marking power is better between 50-70, and the frequency is better than 10KHZ. If the hand feel is good, you can slow down the speed and put the focal length to the normal value of 1MM. Note that if the black surface unevenness exceeds 2MM, it is likely The highest or lowest place is not black. If this happens, either hit it twice or sacrifice the feel to reduce the frequency and increase the power to solve it!
In the actual marking process, because the specific fiber laser marking machine is different, the specific setting of the parameters is different, so we must master the principle of setting parameters.
Why do you want to set the parameters like this? Because the smaller the fill, the darker the black, the lower the speed, the darker the power, the harder the power, the darker the shot, the darker the focal length, but the slower the speed or the better the power, because the energy consumption is too Large words will affect the life of the laser. The adjustment of the frequency is also smaller and darker, but the bigger the feel is, the better it will be. If it is too big, it will not be black. This requires us to consider the actual operation, and the faster we can meet the customer's needs. it is good.
The basic parameters and principles of the fiber laser marking machine when playing black metal are like this. You can try and adjust according to your actual situation.
After-sales
(1)we will supply all the control system and software operate manual,so you can operate the machine easily refer it.
(2)All the machine problem , you can ask me any time , we will help you solve by online way ,or tel,email,remote video at first time ,if all these can't solve your problem , our engineer will go to your factory to help you on spot.
Welcome to our factory for learning how to operate machine ,one professional engineer will together with you , this service for free.
Guarantee:
2 years for whole machine , any parts except consumables broken regarding machine quality within one year,We will send you the parts for free.
All the service is for machine whole life Steel Tube Cutter Table CNC Plasma Cutting Machine
The common laser marking parameters are introduced here. If you have more questions about the software parameters kindly contact us.
Aimee zheng
Email:Aimee@bogongcnc.com
Wbesit：www.bogongcnc.com
Whatsapp:008617615835024.
Jinan Bogong Machinery Co., Ltd
Jinan Bogong Machinery Co., Ltd. specializes in producing fiber laser marking machines, welcome to contact us. Laser laser, professional approach, quality choice.
