8 axis plasma cutting machine
Machine introduction
CNC intersecting wire cutting machine is our newly designed high-efficiency and high-precision automatic pipe cutting equipment, which is mainly used for cutting various low-carbon steel, stainless steel, copper, aluminum and other pipes. The model is beautiful in appearance, compact in structure, stable in operation and easy in operation. The cutting pipe diameter range is 300-25mm, and the cutting pipe length range is 6m. Optionally, it can reach 12m.
Application industry
It can cut the end face of the round tube, the intersection of the round tube and the plane, and the intersection of various round tubes and round tubes, round tubes and spherical surfaces, round tubes and curved surfaces, H-beam channel steel, rectangular tube, square tube.
Machine design
The mechanical part of the machine is mainly composed of a worktable, a power chuck and a cutting head.
The worktable and the power chuck are designed as a whole and processed through the whole machine, so that the longitudinal guide rail and the axis line of the power chuck are kept parallel, which greatly improves the working accuracy of the machine.
Two parallel linear guide rails are installed on the side of the worktable, and a precision rack is installed between the guide rails. The drive system on the moving body drives the gear to rotate, realizing the longitudinal gear and rack transmission.
The power chuck drives the chuck to rotate through the servo motor and the synchronous pulley, and the chuck drives the workpiece to realize forward and reverse rotation. The cutting head is controlled by dual servo motors, which can do axial and radial deflection. The linkage of these motion axes is controlled by the system to realize the cutting of the intersecting lines of the pipes.
The rotating device of the machine adopts two sets of parallel multi-group chucks to drive. When working, you only need to directly hoist the pipe to the working platform, and use the two sets of chucks to automatically determine the axis of the pipe, so that the pipe can be loaded and unloaded. Very convenient.
The CNC intersecting wire cutting machine is based on an eight-axis digital control system. The linkage of multiple motion axes of the entire machine is controlled by the system.
The motion axes of the machine are all driven by AC servo motors, and the system control adopts industrial computer control, which is fully digital and has high stability and reliability.
All gas circuits are equipped with solenoid valves and regulating valves, which can easily realize artificial intelligence control cutting procedures. Oxygen, gas or plasma source, piped to the torch. In order to meet the needs of various cutting processes, the air supply system uses multiple sets of solenoid valves to control the on-off of various air flows. The working pressure of various gases is regulated by a regulator (or called a pressure reducing valve).
The eight axis
Y axis: The whole cutting of the two towers can move left and right along the lateral end of the workpiece.
Y1 axis One tower and two towers move longitudinally parallel to the cutting workpiece as a whole.
X axis: The second chuck moves the whole workpiece back and forth.
B-axis: The torch oscillates axially around the cutting point on the workpiece surface.
C-axis: The torch oscillates radially around the cutting point on the workpiece surface.
Z axis: vertical lift of the second tower cutting torch.
R axis: The rear chuck rotates the workpiece by 720 degrees.
R1 axis: The front chuck rotates the workpiece 360 degrees.
Equipment usage environment
(1) Ambient temperature: -10-50℃
(2) Environmental humidity: monthly average humidity ≤ 80%
(3) Power: control system power input 220V±10% 50HZ + 380V±10% 50HZ
(4) Gas source: (optional flame available) oxygen + acetylene or oxygen + propane (preheating oxygen ≥ 0.7Mpa, cutting oxygen ≥ 1Mpa, gas ≥ 0.05Mpa)
(5) Protective gas: air, oxygen, air pressure 8.3bar, flow rate 0.36 cubic meters per minute
(6) Installation site: indoor installation, concrete foundation, the ground is required to be flat, and the inclination is not more than 1/100
Contact:Anna Gao
Email:sales022@bogongcnc.com
Whatsapp:0086-13256706851
