Fiber laser marking machine Drilling depth how to process?
Sometimes we need to print a deeper mark on stainless steel or die steel.
How to adjust the parameters to meet our requirements with fiber laser marking machine? Bogong Machinery aimee to share with you the industry experience.
One day the customer gave me a very complicated pattern, and at least 0.1mm depth was required to give the pattern a three-dimensional look. So I started the exploration of the depth of stainless steel. In fact, everyone knows why the fiber laser marking machine is called a fiber laser marking machine because it is a laser marking machine using a fiber laser. Note that it is a laser marking machine, not a laser engraving machine.
I told the customer when I first received the request from the customer. It is difficult to tell the clarity of the pattern. It is definitely possible to play the depth on the stainless steel. It is certainly possible to play a depth of 0.1mm, but it will not be easy to say how long it will take. It is. Later, after some attempts, a 50*50 pattern, to play a depth of 0.1, at least 20W fiber laser marking machine for continuous marking for more than 20 minutes?
So I came to the conclusion that, first of all, not all materials can be used to deepen, such as copper, it is already difficult to print on it. Stainless steel is better than the depth. Secondly, the power, the higher the power of the fiber laser marking machine, the easier it is to hit the depth when marking. Of course, there are also different versions of lasers in different depths, and the adjustment of parameters. The parameters should be set to high power, low frequency, low speed.
After playing with low frequency high power and low speed for several times, because of the slow speed, there will be deposits at the marking position, which will hinder the penetration of the laser, so it is necessary to sweep it with high frequency and high speed. Sweep off the deposits and continue to play at low frequencies and low speeds.
If you want to mass produce a certain product, it is not a good choice to use a fiber laser marking machine to have a deep mark.
Aimee zheng
Wbesit：www.bogongcnc.com
Mail:aimee@bogongcnc.com
Whatsapp/skype:008617615835024.
Jinan Bogong Machinery Co., Ltd.
