Laser metal marking features
(1)Processing of most metallic or non-metallic materials.
(2) The laser is processed by a non-mechanical "tool". It does not produce mechanical extrusion or mechanical stress on the material, no "tool" wear, is non-toxic, and rarely causes environmental pollution.
(3) The laser beam is very thin, so that the consumption of the material to be processed is small.
(4) During processing, X-rays are not generated as in the processing methods such as electron beam bombardment, and are not interfered by electric fields and magnetic fields.
(5) Simple operation, automatic machining can be realized by using microcomputer numerical control technology, which can be used for high-speed and high-efficiency processing of parts on the production line, and can be used as a part of flexible processing system.
(6) Fine micromachining can be performed using a precision table.
(7) Use the microscope or camera system to observe or monitor the condition of the surface being machined.
(8) It can be processed through its light-transmissive materials (such as quartz and glass).
(9) A prism or mirror system (for Nd:YAG lasers, which can also use a fiber-optic light guide system) can be used to concentrate the beam onto the inner or inclined surface of the workpiece for processing.
(10) Marks such as barcodes, numbers, characters, patterns, etc.
(11) The line width of these marks can be as small as 12Mm and the line depth can be less than 10Mm, so the zero surface of the "mm" size can be marked.
Aimee zheng
Email:Aimee@bogongcnc.com
Wbesit：www.bogongcnc.com
Whatsapp:008617615835024.
Jinan Bogong Machinery Co., Ltd
