How does fiber laser marking machine mark plastic?

18 May 2022

By BOGONG MACHINERY

We all know that optical fiber laser marking machine is mainly used in metal materials and some non-metallic materials, such as how to on the plastic,

fiber laser marking machine many times on the plastic effect is not very ideal, we use several steps below to tell everyone how on the plastic optical fiber laser marking machine the effect will be better.

1. Open the laser marking machine, and then enter the laser marking machine software EZcad2.

2. Input our text in the input tool of the software, click the FI , and then click in the work area, the default TEXT will appear.

3.In the lower left text area of the software, change the text we want, or change the font we want, and then click Apply.

4.At this time, the text font and the text we changed will appear.

The next step is the key point. We see that there are default parameters on the right side of the software. We check and cancel the default parameters.

5.Then the speed of the marking machine is adjusted to 1500~1000, and then the power is adjusted to 10~20.

Here we take an intermediate value, the speed is adjusted to 1000 speed, and the power is adjusted to 10.

At this point we can start marking so that we don't burn the surface of the text.

In view of the general plastic laser marking, we will recommend optical fiber laser marking machine, in fact if you need a better effect,

we can use co2 laser marking machine to finish on the plastic type, but within the scope of the cost control, we play the effect of boundary function complete optical fiber laser is very good,

here are some of our sample testing and customer feedback, I believe fiber laser marking machine is a good choice for you.